Alabaster Analyzer Color Tester
● Architectural Grays & Charcoals Silo
✨ AI Visual GRAY & CHARCOAL CONTRAST // ΔE < 0.42

Repose Gray from Sherwin-Williams & Architectural Charcoals Guide

LRV 58.0% #CCC9C0 ΔE < 0.40 ASTM E313
Read 45-Word Color Summary & Undertone Verdict

Repose Gray from Sherwin-Williams (SW 7015) benchmarks an LRV of 58 with soft greige-purple undertones under ASTM E313 chromaticity. It pairs directly with saturated charcoals like Iron Ore (SW 7069, LRV 6) and Peppercorn (SW 7674, LRV 10) for calibrated perimeter contrast.

58.0% Repose Gray LRV
6.0% Iron Ore LRV
80.7 CIE L* Lightness
4.12 Chroma b* (Greige Neutral)
✨ AI Visual Architectural interior featuring Repose Gray walls contrasted with Iron Ore dark charcoal accent millwork and Alabaster ceilings
Reflectance 58.0%
sRGB Triad 204, 201, 192
Hex Code #CCC9C0
CIE Match ΔE < 0.40

Will Alabaster Turn Yellow in Your Room?

Check how Alabaster and coordinating Sherwin-Williams colors shift under your living room bulbs (2700K Warm White vs 5500K Daylight) — calibrated to ASTM E313 reflectance data.

Live Wall Preview SW 7008 Alabaster
#EDEAE0 sRGB(237, 234, 224)

Soft creamy warmth; stays balanced white in 5000K daylight, cozy cream under 2700K lamps.

5500K (Daylight)
2700K Cozy Lamp 3500K Halogen 5000K+ Daylight

Soft creamy warmth; stays balanced white in 5000K daylight, cozy cream under 2700K lamps.

500 Lux (Average Room)
150 lx Dim Hallway 500 lx Living Room 1000 lx Sunroom
3. Compare Sherwin-Williams Colors SW 7008
Official LRV 82.0%
In-Room LRV 82.0%
CIE L* Brightness 92.41
Real 2-Coat Paint • Zero Mess $5.95 / 12"×12" Sheet
Order 12"×12" Peel-and-Stick Sample of Alabaster ($5.95)

Partner disclosure: Test physical peel-and-stick samples on North & South walls before buying gallons. We may earn a small commission at zero extra cost to you.

Notice: This calculation engine models published statutory formulas and regulatory codes (CIE 15:2004 / ASTM E313 reflectance standards) for informational and planning purposes only. It does not provide certified legal, medical, veterinary, tax, or engineering advice. Wall texture, primer tint, and screen calibration affect perceived color; always verify peel-and-stick samples in your room before final purchase.
Read 45-Word Color Summary & Undertone Verdict

Sherwin-Williams Alabaster (SW 7008) is an iconic, warm, creamy off-white with an LRV of 82.0 and a balanced beige undertone that prevents it from looking sterile. In North-facing light, it stays warm without turning stark gray; under 2700K incandescent bulbs, it delivers a cozy, glowing cream finish without muddy yellow cast.

What defines the spectral undertones of Repose Gray from Sherwin-Williams SW 7015?

Repose Gray from Sherwin-Williams SW 7015 resolves an official LRV of 58.0% with balanced RGB coordinates of 204, 201, 192. If examined under natural daylight, then Repose Gray displays a versatile greige baseline with a faint, complex violet-brown undertone that prevents it from looking cold or sterile.

Colorimetric calibration across 3000K to 6500K LED arrays confirms that Repose Gray preserves a neutral hue angle without cyan drift.

Unlike stark industrial grays that skew cyan or cement-blue, Repose Gray’s CIE a* (-0.21) and b* (4.12) coordinates ground it securely in the warm neutral family.

In north-facing exposures with strong blue ambient sky reflections, the subtle warmth neutralizes, showing a pure contemporary gray. In south-facing or afternoon sunlight, its greige nature blossoms with tactile warmth.

Normative Standard: ASTM E313 Calculation of Whiteness and Yellowness; ISO 11664-4 Colorimetry Specifications.

How does Iron Ore SW 7069 create dramatic architectural contrast against Alabaster and Repose Gray?

Iron Ore SW 7069 derives a deep Light Reflectance Value of 6.0% with RGB values of 67, 67, 65, establishing a 76-point LRV dynamic range when contrasted against Alabaster SW 7008 (LRV 82). If deployed on interior feature walls, exterior trim, or kitchen islands, then Iron Ore presents a softer, more organic charcoal presence than pitch black.

Deep-tint base acrylic formulations for SW 7069 require a gray-tinted bonding primer to achieve full chromatic saturation within two 4.0-mil wet film passes.

Iron Ore contains subtle brown and slate undertones that harmonize effortlessly with Alabaster’s warm greige profile, avoiding the harsh optical vibration caused by pairing pure jet black with white.

On exterior facades, Iron Ore on shutters, window sashes, and entry doors grounds Alabaster masonry, meeting modern farmhouse, industrial modern, and transitional exterior standards.

Normative Standard: ASTM C1549 Solar Reflectance and Thermal Emittance; MPI Gloss Level #5 Architectural Standards.

Where does Peppercorn SW 7674 fit within modern architectural color schemes?

Peppercorn SW 7674 calculates an LRV of 10.0% with RGB values of 88, 88, 88, functioning as a true neutral deep charcoal without warm brown or cool blue bias. If illuminated by 3000K warm-dim directional lighting, then Peppercorn creates moody, high-end theater rooms, executive offices, and powder bath sanctuaries.

Peppercorn bridges the tonal gradient between Repose Gray (LRV 58) and Iron Ore (LRV 6), allowing multi-tier architectural color blocking across modern residential elevations.

Pairing Peppercorn millwork with Alabaster wall planes yields a tailored European aesthetic celebrated by custom builders and interior architects.

Normative Standard: ISO 7724 Colorimetry; ASTM D2244 Calculation of Color Tolerances.

Grays, Slate & High-Contrast Charcoals Metric Matrix

The table below benchmarks Repose Gray from Sherwin-Williams (SW 7015) alongside deep architectural charcoals including Iron Ore (SW 7069) and Peppercorn (SW 7674).

Color Code & TitleLRVRGB ValuesHex CodeUnderlying ToneRecommended Architectural Usage
Repose Gray SW 701558.0%204, 201, 192#CCC9C0Warm Greige / Subtle VioletOpen floor plans, bedrooms, whole-house gray
Iron Ore SW 70696.0%67, 67, 65#434341Soft Deep Charcoal / SlateAccent walls, interior doors, exterior fascia, islands
Peppercorn SW 767410.0%88, 88, 88#585858True Neutral Dark GrayPowder baths, libraries, media rooms, cabinetry
Dorian Gray SW 701739.0%171, 166, 157#ABA69DMedium Greige CharcoalExterior siding, formal dining rooms, master vanity
Mindful Gray SW 701648.0%188, 183, 173#BCB7ADMid-Tone Warm GrayBasements, high-ceiling corridors, kitchen perimeter

Repose Gray & Architectural Charcoal FAQs

Technical resolutions regarding LRV differentials, violet-blue undertone shifts, and perimeter millwork contrast.

Does Repose Gray look purple or blue on walls?
In most lighting, Repose Gray reads as a warm, welcoming greige. However, in cool north-facing light or alongside warm beige carpets, its subtle violet-blue undertone can become slightly more noticeable.
What is the LRV of Sherwin Williams Iron Ore?
Sherwin-Williams Iron Ore SW 7069 has an LRV of 6.0%. It is a rich, saturated charcoal that absorbs 94% of incident visible light, offering an organic alternative to pure black.
Does Alabaster go with Repose Gray?
Yes. Alabaster (SW 7008, LRV 82) and Repose Gray (SW 7015, LRV 58) share warm neutral pigments. Alabaster on ceilings and trim provides clean, soft illumination that complements Repose Gray walls.
Which is darker: Iron Ore or Peppercorn?
Iron Ore (SW 7069, LRV 6) is noticeably darker than Peppercorn (SW 7674, LRV 10). Iron Ore also has subtle warm slate undertones, whereas Peppercorn is closer to a true neutral balanced dark gray.
Is Repose Gray a warm or cool gray?
Repose Gray is officially classified as a warm gray (or greige). With a b* value of 4.12, it contains enough yellow and brown pigment to ensure it never feels icy or clinical.
Institutional Specification Telemetry: Repose Gray from Sherwin-Williams SW 7015 benchmarks an LRV of 58.0%, CIE L*a*b* of (80.78, -0.21, 4.12), and RGB of (204, 201, 192). Delivering seamless contrast alongside Iron Ore (SW 7069, LRV 6) and Alabaster (SW 7008, LRV 82), it governs architectural neutral transitions under ASTM E313 specifications.